New ebook: The Rocket Powered Oven by Tim Barker, Illustrations by Joel Meadows

Cover: The Rocket Powered Oven: How to Build Your Own Super-Efficient CookerWe’re incredibly proud to be publishing this!

It’s a  step-by-step guide to building your own super-efficient rocket powered oven. The most comprehensive build-your-own project of it’s type by our very own: leading Australian alternative technology innovators, Tim Barker and Joel Meadows.

ebook available for $9 via our friends at Permaculture Principles
Price in Aussie $ — that’s something like $US6

Learn the fundamentals of rocket stove design that powers the oven, and choose between one of two designs to build. A Black Oven, which reuses an existing gas or electric oven and a White Oven, which can be made using 2 x 200lt (44 gal) drums.

Most materials required for the build are cheap and can be easily found. In fact, you may have some of them laying around your home, just crying out to be used.

A great do-it-yourself project or get together with a small group for even more fun.

White oven sample page img_0631

dsc01932 joel and tim bread rising

Here’s the foreword written by Adam Grubb.

Foreword: the future of fire

Around a million years ago our ancestors learnt to control the mysterious and powerful force of fire. So significant was this moment, that by the time we would retrospectively come to be known as Homo sapiens, our whole digestive system had come to expect its food cooked, and our lungs had adapted to air pollution.

It’s somewhat humbling therefore to learn that for those last one million years – and let’s not mince words here – we’ve been doing it wrong.

Three billion people continue to cook on biomass each day. The smoke caused by this (despite our genetic adaptations) is a major health concern, and the excessive use of fuel is a major environmental one. Smoke however, is nothing but unburnt fuel, and more efficient combustion offers both more heat, and an end to the cancer and coughing.

Enter the rocket stove. First conceived by Dr. Larry Winiarski in 1982, the rocket stove is so subtly simple a technology that it could have been around for all one million of those smoky years. Talk about missed opportunity. But at least it is known now. In retrospect it’s an almost obvious concept: burn the fuel first and fully, and then, and only after complete combustion, extract the heat. At the crudest end of the spectrum, you can build them with nothing more than a few bricks and some mud. It’s perhaps this simplicity – it’s not a Tesla sports car after all – that explains why the Wikipedia ‘rocket stoves’ entry at time of writing sits at a measly 150 words. But trust us, this is a much more revolutionary technology than any over-hyped sports car.

Tim Barker and Joel Meadows

Tim Barker and Joel Meadows

No one I’ve met has as much enthusiasm, knowledge, and hands on experience in rocket stoves as Tim Barker. Tim is a perennially ash and grease-stained appropriate technology tinkerer with a professional mechanical background, combined with years of experience in permaculture. He also admits to something of a pyromaniac tendency. Thank the stars he’s harnessing it for our good. You’re helping keep him on the narrow good path by downloading this booklet. Seriously, with a dearth of good, cheap, accessible information about rocket stoves, a better person could not be found to produce this booklet. Our illustrator, Joel Meadows, is a himself an appropriate technologist, craftsperson, metal worker and permaculture practitioner par excellence. When Tim and Joel get together the ideas flow and sparks always soon literally fly. They are always pushing themselves, always learning, and we’re extremely proud to have them together in this much needed publication that can help you avoid the pitfalls, and make a great rocket stove powered oven to call your own.

Adam Grubb is Co-director (with Dan Palmer) of Very Edible Gardens PTY LTD in Melbourne, Australia, and co-author of The Weed Forager’s Handbook and The Art of Frugal Hedonism.

Read the rest of the book: permacultureprinciples.com

Our First Natural Building Workshop!

Sign up here or click on poster…

naturalbuildingworkshop

Photos from the 2016 Rocket Stoves workshop

We had such a good time!!

Joel Meadows talks through his charcoal retort oven

Alt-tech workshops team member Joel Meadows has just completed this amazing piece of alt-tech wizardry – allowing him to simultaneously create top-notch charcoal for his forge and cook dinner at the same time! Then, after dinner, he can go make another knife or something in his charcoal-powered forge (which in turn he can use to slice tomorrow’s pizza).

A Rocket Oven to Call my Own

Ever since our first rocket stove workshop with Tim Barker in Victoria I’ve been secretly coveting a rocket oven to call my own.

So you simply cannot imagine my excitement when in a NZ tipshop (the famous seagull centre in Thames) I came across an old, rusty, yet solidly constructed rocket oven core that had been build almost exactly (yet seemingly independently) to the specs of Tim’s design. Right down to the two sets of baffles to force the exhaust gases to conduct an S path up each side of the oven core, slowing the transit time and allowing more heat transfer (though Tim tells me he’s gone off baffles these days, a story for another time…).

IMG_3068 IMG_3069 IMG_3070 IMG_3071

This oven core would have taken me at least three days of material sourcing and fabricating. So to pick it up, along with some bits of flue, for $10, I was rather stoked. The only obvious issue was the abrupt reduction in the cross-sectional surface area of where the flue exited the top of the oven – an easy fix. The cavity gap or the distance between the two skins through which the flue gasses would travel was also quite small – about 25-30mm, so I wasn’t sure how well the gasses would actually flow, but it certainly seemed like there was scope for a scone or two. I loved that it looked like a bit of rusty junk but that thanks to Tim I had the eyes to see it for the precious jewel that it was.

The thing kept rusting for the next 10 months or so until we found ourselves relatively settled in our new housebus park up. Relatively settled yet ovenless. The time had come to pull it out and get it working.

After another visit to the tip shop I returned with a stand made for working on outboard motors. My mate Pete and I soon grinded (me & Pete’s son Toby) and arc welded (him) this into a perfect little stand for the core. A quick visit to my dad’s shed yielded a length of stainless steel flue pipe long enough to make up the heat riser and the flue out the top of the oven. I even got his permission before nicking off with it.

Within a day we had ourselves a stand and I had riveted on the flue top and bottom. About ten minutes later I’d put it outside and fitted into into a perfectly sized bit of concrete block (which I’ve found falls to bits after a few months – fire bricks or old red bricks much better).

IMG_0173

First pass (before insulation). Note the awesome home-made charcoal kiln in background (for my mate Pete’s home-made forge).

I lit it expecting it to fail dismally, or to barely work, and for us to start a long process of tweaking it to get it operational. Imagine my surprise when it started drawing straight away, and within ten minutes was hot enough to bake a tray of scones in no time at all!

The next day we took it to our house bus site and set it up again. I fitted a thermometer (again from the trusty tip shop – from an old bbq lid) in order test it out without any insulation and then to keep testing it as we gradually insulated different bits.

IMG_0218

The fist thing I insulated was the oven core by wrangling & riveting an old hot water cylinder shroud. Two finger cuts later we filled it up with pumice and fired it up again (thanks Ciela & Nikka!).

IMG_0191 IMG_0196 IMG_0217 IMG_0210

IMG_0208

 IMG_0197

Next we insulated the riser with a pumice-filled larger flue section which we squished into an oval profile for easier dismantling when we come to move the unit (thanks Brad!).

IMG_0230 IMG_0232 IMG_0233 IMG_0219

IMG_0218

Then the burn tunnel and base of the riser which was shedding much heat (Thanks Manda!).

IMG_0247 IMG_0246 IMG_0248

Meantime whilst I was collecting data it was obvious that what the thermometer on the door said was very different to the actual temperature inside, which was obviously a lot hotter. I estimated by about 50 degreed celsius. So in the name of science I ordered a couple more thermometers, one magnetic one for the outside and one that sits inside the oven exactly where the actual food goes, and both measuring up to a very uncool 400 degrees celsius. The pizzas kept coming and often we’d do several loaves of bread, enough pizzas for ten people, and some sort of desert in one go.

IMG_0221

The most impressive timed session I got out of it so far was getting to 180 degrees celsius in 6 minutes, 225 degrees C in 7 minutes, then maxing out at 365 degrees C after 13 minutes. By this point the base of the oven inside was glowing red hot. We were cooking pizzas start to finish in 3 minutes 50 seconds and the only smoke was when we left them in too long. All on a handful of twigs I tell you, a handful of twigs! The thing I really love is that is faster to heat up than a conventional electric or gas oven. So in that sense, twigs aside, it is actually more convenient than its conventional, expense, non-renewable energy gobbling alternative.

Shortly thereafter Tim visited. Things were going quite well till the moment of truth and it came time to light the oven and I got a bit nervous and overloaded it and there was smoke everywhere and flames going the wrong way, and, oh gosh it was not ideal. The student humiliating himself in front of the sensei. Only for a few minutes though – luckily the rocket then started rocketing, the awkward silence broke, and on a few willow twigs we took it up to 355 degrees c at which point the thermometer appeared to jam up. As for the pizzas – oh gosh – delicious.

DanTimPizza

The apprentice and the sensei enjoying rocket pizza.

And that’s it. I’m done here. What, you want some kind of wrap up? Fine – here you are: Then, dear readers, me, my family, and our brand new rocket oven lived happily ever after. If you would like a similarly happy ending and a much better built oven get yourself along to our next rocket stove/efficient combustion workshop. The end.

Tim Barker explains what rocket combustion is

A short edited clip from our last rocket stove / efficient combustion workshop run by Tim (at Joel’s place).

 

Rocket Stoves Workshop Report – Part Three – Megan’s mini Rocket Cooker

So this article builds on Parts One and Two and focuses on workshop participant Megan’s construction of a little rocket-stove-powered-cooker she built during our recent The Power of Rocket Stoves workshop with Tim Barker.

Here’s the style of stove Megan was after (from this page)

 

rocketmaterials

Ze raw ingredients

 

IMG_2679

Marking out a hole in a 20-litre tin

 

IMG_2680

Tim is the ultimate tinkerer (not to mention self-confessed pyromaniac) and knows all the tricks!

 

IMG_2688

Fitting the lid and flue (insulated with a subsoil/vermiculite mix)…

 

the insulation

Which looks like this

 

IMG_2687

Lovely…

 

IMG_2700

Light it up and BOOM! Actually as good as this looks it is not how rocket stoves actually work (the combustion and flames are supposed to be down inside the insulated burn chamber). But the flue Megan used was from an old fish and chip shop so this is about 20 years of fat and grease going up!

 

rocketination

Cooking up a storm a few days later at the Brunswick Tool Library

 

rocket4

So there you have it, all and all a great workshop. Tim’ll be back for another one, don’t worry about that, where we’re keen to try a rocket stove mass heater – any volunteers? Find our next rocket stove workshop here.

Our First-Ever Rocket Stoves Workshop Report – Part Two – The Water heater

So this article builds on the last and shares some photos of our construction of the rocket-stove-powered-hot-water-heater we (mostly) built during our first ever Rocket Stoves workshop with Tim Barker. This unit went up at Yandoit Farm, Victoria, and continues to work beautiful several years later…

IMG_2684

Breille & friend getting the base unit in place…

 

IMG_2686

Lovely!…

 

IMG_2689

IMG_2690

IMG_2692

IMG_2703

Michael and Tim looking pretty stoked…

IMG_2572

See Part Three- Megan’s Mini Rocket Cooker here. Find our next rocket stove workshop here.

Our First-Ever Rocket Stove Workshop Report – Part One – The Oven

Back in May 2014  Tim led our first ever rocket stove workshop on how to build simple rocket stove combustion units for such uses as water heating, ovens, and mass heating. It was a fantastic workshop, hosted by the wonderful Michael and Lisa Jackson at Yandoit Farm, and we wanted to share a few photos and a bit of know-how, here on the oven, with further reports to come on the hot water unit and Megan’s mini-rocket cooker.

Now rocket stoves are super exciting for a few reasons. As noted by Tim:

  1. They offer complete combustion of the wood
  2. They can reach very high temperatures
  3. They can use wood typically considered too small to bother with
  4. They are easily built from common materials.

In other words you can knock these suckers up in a day or two, and they turn twigs into heat way more efficiently than most wood stoves and with way less cost to set up. If you are good at scavenging bits they can cost virtually nothing to build, and when you prune your fruit trees you can get the fuel you need to cook dinner, heat your home, and enjoy a nice hot shower.

IMG_2639

Tim kicking off in the Yandoit Farm hayshed.

We started with a little bit of theory (the workshop was about 95% hands-on) with Tim, who got across the key points of difference between rocket combustion and normal combustion. This is all Dan’s possibly muddled recollection, but the main difference is that rocket combustion is complete. Because the compounds released from the wood heated when added to the rocket stove are sucked into the flames, unlike a normal fire, combustion is complete, meaning no smoke. That’s right – smoke mean incomplete combustion, or wasted energy. It was really weird looking down the flue of our first rocket unit at the workshop and feeling the hot air but seeing zero smoke. For we are culturally trained to associate smoke with fire, but with rocket stoves it is true that sometimes when there is no smoke, there is still fire! The second difference is that rocket stoves focus on ensuring complete combustion and only then use the resultant heat. Conventional wood stoves and often use the heat before combustion is complete. The combustion chamber of the rocket stove is heavily insulated to prevent premature heat loss.

Anyway, enough theory, let’s jump to practice, as we did on the Saturday morning.

IMG_2656

Whilst Tim showed us how to make the base rocket stove unit from old bricks…

IMG_2642

VEG’s Carey and friends (Chris, Brielle & Paul) constituted the poo collection crew. 20 minutes into the workshop and they were shovelling shit!

IMG_2647

Which we mixed with subsoil to make a cob mix

IMG_0749

With some relatively clean feet..

IMG_0752

But not for long!

IMG_2671

Work that cob!

IMG_0754

Consider it worked.

IMG_0750

Relatively unclean feet..

IMG_0760

Beautiful cob blobs

IMG_0762

And such fun to make!

IMG_0767

Securing the base layer

IMG_0786

Reshaping the base unit (feeder tube, burn tunnel, and riser)

IMG_0796

Flue fitted

IMG_0791

Praise to the rocket gods

IMG_0800

Blob on the cob

IMG_2676

Coming up beautifully!

IMG_0798

Here’s one I prepared earlier 🙂

IMG_2677

Frame was attached…

IMG_2641

A quick chat about the immanent fate of these nice blue barrels…

IMG_0725

Measuring…

IMG_2644

Revving up the grinder (nice one Megan!)

IMG_0723

Brielle aka The Permaculture Terminator

IMG_0732

Sparks fly!

IMG_2672

Fitting the outer to the inner skin.

IMG_2673

Sitting on the frame.

IMG_2698

IMG_2696

“I am Geoffrey, the badger hunter. Let me tell you the story of my people” – a comment from sculptor Dean.

IMG_0823

Pyromaniac Tim getting ready to fire the rocket!

IMG_0827

The puff that turns it from a normal fire into a rocket

IMG_0839

Ladies and gentlemen, we have lift off…

IMG_0837

This is what complete combustion looks like – look mum – no smoke!

IMG_0834

Go Team!!!

IMG_0831

Tim going for the giant-bong look…

IMG_2568

Yandoit farm resident and exceptionally wonderful human being Chris who finished off the stove all by herself in the two weeks after the workshop…

IMG_2741

And who would have thought something so rough and ready and functional could be so beauuutiful!

IMG_2746

Recycled old supermarket shelves

DSC01183

Finishing off dinner in the oven which we can say lives up to its rep and cooked about seven pizzas and finished off these pies effortlessly and quickly on bugger all wood.

DSC01177

Yeah baby!

See Part Two – the water heater here. Find our next rocket stove workshop here.

Tim’s Creation at 2015 Missoula Rocket Stove Workshop

Twice now www.AlternativeTechnology.com.au’s Tim Barker has been invited over to the Mecca of Rocket Stoves – Paul Wheaton’s Rocket Stove Lab over in Missoula, USA. Here during his most recent visit he talks us through what he’s been up to – a portable rocket combustion powered field kitchen with a rocket hotplate, oven and water heater all in the one unit.

« Older posts